United Brass Works Model 62 One-piece Body Swing Check Valve
Description
The Model 62, United Brass Works, One-piece body swing check valve has been designed for use as a one direction flow valve. It can be used with the majority of industrial fluids for services ranging from vacuum to the higher temperatures and pressures.
This valve dose not contain a PTFE Disc, See Model 62T.
This valve is commonly used to control the flow of water in the feedline system.
*Contains lead. Not for use in water systems intended for human consumption*
Install in horizontal position with cap in upright position. Not recommended for pulsating or vibrating service.
When used on Boiler feed line it is recommended that a Model 50T spring loaded check valve be used in conjunction with Model 62 with the Model 62 located nearest to the boiler and the #50T located nearest to the pump.
CNR approved valve.
Contact info@arcticboilers.com for pricing
Additional information
| Pipe Size | 1 inch NPT, 1-1/4 inch NPT, 1-1/2 inch NPT, 2 inch NPT |
|---|---|
| MWP | 200 lbs. WSP at 406F max |
| Rated | 400 Lbs. WOG |
| Made in | USA |
